DON’T LIKE THE NEW GAS SPOUTS WITH AUTO SHUT OFF?

DON’T LIKE THE NEW GAS SPOUTS WITH AUTO SHUT OFF?

Our universal gas spout replacement kits will make your gas can pour perfect. We also include a 1/2 inch easy to install push in vent for added safety and ease of pouring!

Learn More
UNIVERSAL GAS SPOUT KIT

UNIVERSAL GAS SPOUT KIT

Our replacement gas spout kits work with over 98% of ALL plastic cans in use today! They also include an easy to use 1/2" push in vent cap making your cans not only safer but will also increase the flow rate.
Make all your gas can pour perfect!

Learn More

Great Features

  • Universal Fit

    Our universal gas spout kits fits 98% of ALL plastic cans being used today! This includes: Eagle, Gott, Briggs-Stratton, Rubbermaid, Essence, Blitz, Koplin, Wedco, Scepter cans, and more.

  • Included Vent Cap

    All of our kits include an easy to install 1/2" push in vent cap; for safety and ease of pouring. The vent cap  fits many older cans that have a 1/2” hole for a vent. Can also be easily installed by drilling 1/2” hole.

  • Includes Flame Arrestor

    Safety first! All of our spouts include a build in flame arrestor. A flame arrester is a metal screen that is supposed to prevent a spark or a flame from jumping back into the can and exploding.

Buy Replacement Gas Can Spout Kit

$9.97

$15.99

Frequently Asked Questions

How do I install the included vent cap?

1. Make sure the container is EMPTY.
2. Find a flat spot above the fill line at the top rear of the container.
3. We suggest using a 1/8" drill bit to start the hole. If you do not have a step or step or paddle bit.
4. Then use a 1/2" bit to drill a clean straight hole.
5. Scrape remaining plastic waste off.
6. Hold Vent cap in place & pop in gently with a rubber mallet.
7. Clean out shavings from inside of container prior to usage.

What type of fuel cans can use this product on?

The spout kits are designed only for use on plastic portable fuel containers manufactured prior to January 1, 2009. However, they will fit most plastic cans made after that as well as ALL cans currently being manufactured!

What are the two different color base caps for?

In most cases you will simply need to use the can's original cap and just replace the spout itself. The black cap has fine threads and generally fit the old Rubbermaid, Briggs and Stratton, Essence and Gott cans, the yellow cap has coarse threads and fits the Blitz, Scepter, and Plastic Eagle.

Are there any cans that the spouts kits do not fit?

The gas spouts kits are a universal fit for over 98% of plastic cans in use today. However, they will not fit metal "jerry gas cans" nor the old Chilton cans (adaptor available) and Orange Gott cans. However, most people do NOT have these types of cans.

Why are there two small caps?

Both caps fit the end of the spout, one can be used for the vent on older Rubbermaid cans, or you can use it for a second spout cap in case you lose the first.

The new base cap does not fit or leaks, what do I do?

Try using the new spout and your original base cap as this will work in most applications. There were many molds over the years and the tolerances varied greatly and this is why we include additional base caps .

How flexible are the spouts?

The spouts are made of HDPE plastic and not rubber, they are flexible, however bending them in the cold, or severe bends may cause cracking. Use care when pouring to avoid spills.